Warden Protocol. Installing the node
- Main
- Knowledge base
- Warden Protocol. Installing the node
10.09.2024, 17:16
Warden Protocol is an intents-oriented blockchain built on the Cosmos SDK.
Features
Among its key features are:
-
Intents: transactions aimed at achieving specific goals.
-
Keychains: flexible key management.
-
EVM and WASM support for smart contracts.
These features create attractive opportunities for both developers and users of the blockchain ecosystem. The Warden Protocol encourages open and permissionless innovation by enabling secure, intent-based cross-chain interactions.
The protocol leverages the modularity of Cosmos and IBC to create interoperable blockchain solutions. The focus is on mitigating the risks of losing asset management and simplifying the integration of different key management solutions, which greatly enhances security and user control over digital assets.
Minimum equipment requirements:
|
Node Type |
CPU |
RAM |
Storage |
|
Testnet |
4 |
8GB |
150GB |
Installing Warden Protocol
Automatic installation:
wget -O wardent https://raw.githubusercontent.com/111STAVR111/props/main/Warden/wardent && chmod +x wardent && ./wardent
Manual installation:
Server preparation:
sudo apt update && sudo apt upgrade -y
sudo apt install curl tar wget clang pkg-config libssl-dev jq build-essential bsdmainutils git make ncdu gcc chrony liblz4-tool -y
sudo apt install curl tar wget clang pkg-config libssl-dev jq build-essential bsdmainutils git make ncdu gcc chrony liblz4-tool -y
Installing Go 1.21.6:
ver="1.21.6"
wget "https://golang.org/dl/go$ver.linux-amd64.tar.gz"
sudo rm -rf /usr/local/go
sudo tar -C /usr/local -xzf "go$ver.linux-amd64.tar.gz"
rm "go$ver.linux-amd64.tar.gz"
echo "export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin" >> $HOME/.bash_profile
source $HOME/.bash_profile
go version
wget "https://golang.org/dl/go$ver.linux-amd64.tar.gz"
sudo rm -rf /usr/local/go
sudo tar -C /usr/local -xzf "go$ver.linux-amd64.tar.gz"
rm "go$ver.linux-amd64.tar.gz"
echo "export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin" >> $HOME/.bash_profile
source $HOME/.bash_profile
go version
Build (02.09.24):
cd $HOME && mkdir -p go/bin/
wget https://github.com/warden-protocol/wardenprotocol/releases/download/v0.4.2/wardend_Linux_x86_64.zip
unzip wardend_Linux_x86_64.zip
rm -rf wardend_Linux_x86_64.zip
chmod +x wardend
mv wardend $HOME/go/bin/wardend
wardend version --long | grep -e version -e commit
wget https://github.com/warden-protocol/wardenprotocol/releases/download/v0.4.2/wardend_Linux_x86_64.zip
unzip wardend_Linux_x86_64.zip
rm -rf wardend_Linux_x86_64.zip
chmod +x wardend
mv wardend $HOME/go/bin/wardend
wardend version --long | grep -e version -e commit
Initialization:
wardend init STAVR_guide
Create/Recover Wallet:
wardend keys add <walletname>
OR
wardend keys add <walletname> --recover
OR
wardend keys add <walletname> --recover
Download Genesis:
wget -O $HOME/.warden/config/genesis.json http://135.181.210.171:29/genesis.json
sha256sum $HOME/.warden/config/genesis.json
sha256sum $HOME/.warden/config/genesis.json
Setting the minimum gas price, peers and filters:
sed -i.bak -e "s/^minimum-gas-prices *=.*/minimum-gas-prices = \"0.0025uward\"/;" ~/.warden/config/app.toml
external_address=$(wget -qO- eth0.me)
sed -i.bak -e "s/^external_address *=.*/external_address = \"$external_address:26656\"/" $HOME/.warden/config/config.toml
peers=""
sed -i.bak -e "s/^persistent_peers *=.*/persistent_peers = \"$peers\"/" $HOME/.warden/config/config.toml
seeds=""
sed -i.bak -e "s/^seeds =.*/seeds = \"$seeds\"/" $HOME/.warden/config/config.toml
sed -i 's/max_num_inbound_peers =.*/max_num_inbound_peers = 50/g' $HOME/.warden/config/config.toml
sed -i 's/max_num_outbound_peers =.*/max_num_outbound_peers = 50/g' $HOME/.warden/config/config.toml
external_address=$(wget -qO- eth0.me)
sed -i.bak -e "s/^external_address *=.*/external_address = \"$external_address:26656\"/" $HOME/.warden/config/config.toml
peers=""
sed -i.bak -e "s/^persistent_peers *=.*/persistent_peers = \"$peers\"/" $HOME/.warden/config/config.toml
seeds=""
sed -i.bak -e "s/^seeds =.*/seeds = \"$seeds\"/" $HOME/.warden/config/config.toml
sed -i 's/max_num_inbound_peers =.*/max_num_inbound_peers = 50/g' $HOME/.warden/config/config.toml
sed -i 's/max_num_outbound_peers =.*/max_num_outbound_peers = 50/g' $HOME/.warden/config/config.toml
Data trimming (optional):
pruning="custom"
pruning_keep_recent="1000"
pruning_keep_every="0"
pruning_interval="10"
sed -i -e "s/^pruning *=.*/pruning = \"$pruning\"/" $HOME/.warden/config/app.toml
sed -i -e "s/^pruning-keep-recent *=.*/pruning-keep-recent = \"$pruning_keep_recent\"/" $HOME/.warden/config/app.toml
sed -i -e "s/^pruning-keep-every *=.*/pruning-keep-every = \"$pruning_keep_every\"/" $HOME/.warden/config/app.toml
sed -i -e "s/^pruning-interval *=.*/pruning-interval = \"$pruning_interval\"/" $HOME/.warden/config/app.toml
pruning_keep_recent="1000"
pruning_keep_every="0"
pruning_interval="10"
sed -i -e "s/^pruning *=.*/pruning = \"$pruning\"/" $HOME/.warden/config/app.toml
sed -i -e "s/^pruning-keep-recent *=.*/pruning-keep-recent = \"$pruning_keep_recent\"/" $HOME/.warden/config/app.toml
sed -i -e "s/^pruning-keep-every *=.*/pruning-keep-every = \"$pruning_keep_every\"/" $HOME/.warden/config/app.toml
sed -i -e "s/^pruning-interval *=.*/pruning-interval = \"$pruning_interval\"/" $HOME/.warden/config/app.toml
Disabling the indexer (optional):
indexer="null" &&
sed -i -e "s/^indexer *=.*/indexer = \"$indexer\"/" $HOME/.warden/config/config.toml
sed -i -e "s/^indexer *=.*/indexer = \"$indexer\"/" $HOME/.warden/config/config.toml
Downloading the address book:
wget -O $HOME/.warden/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Warden/addrbook.json"
Creating a service file:
sudo tee /etc/systemd/system/wardend.service > /dev/null <<EOF
[Unit]
Description=wardend
After=network-online.target
[Service]
User=$USER
ExecStart=$(which wardend) start
Restart=on-failure
RestartSec=3
LimitNOFILE=65535
[Install]
WantedBy=multi-user.target
EOF
[Unit]
Description=wardend
After=network-online.target
[Service]
User=$USER
ExecStart=$(which wardend) start
Restart=on-failure
RestartSec=3
LimitNOFILE=65535
[Install]
WantedBy=multi-user.target
EOF
Warden Testnet State Synchronization
SNAP_RPC="https://warden.rpc.t.stavr.tech:443"
sed -i.bak -e "s/^seeds *=.*/seeds = \"$SEEDS\"/; s/^persistent_peers *=.*/persistent_peers = \"$PEERS\"/" $HOME/.warden/config/config.toml
LATEST_HEIGHT=$(curl -s $SNAP_RPC/block | jq -r .result.block.header.height) \
&& BLOCK_HEIGHT=$((LATEST_HEIGHT - 1000)) \
&& TRUST_HASH=$(curl -s "$SNAP_RPC/block?height=$BLOCK_HEIGHT" | jq -r .result.block_id.hash); \
echo $LATEST_HEIGHT $BLOCK_HEIGHT $TRUST_HASH
sed -i.bak -E "s|^(enable[[:space:]]+=[[:space:]]+).*$|\1true| ; \
s|^(rpc_servers[[:space:]]+=[[:space:]]+).*$|\1\"$SNAP_RPC,$SNAP_RPC\"| ; \
s|^(trust_height[[:space:]]+=[[:space:]]+).*$|\1$BLOCK_HEIGHT| ; \
s|^(trust_hash[[:space:]]+=[[:space:]]+).*$|\1\"$TRUST_HASH\"|" $HOME/.warden/config/config.toml; \
wardend tendermint unsafe-reset-all --home $HOME/.warden
wget -O $HOME/.warden/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Warden/addrbook.json"
sudo systemctl restart wardend && journalctl -u wardend -f -o cat
sed -i.bak -e "s/^seeds *=.*/seeds = \"$SEEDS\"/; s/^persistent_peers *=.*/persistent_peers = \"$PEERS\"/" $HOME/.warden/config/config.toml
LATEST_HEIGHT=$(curl -s $SNAP_RPC/block | jq -r .result.block.header.height) \
&& BLOCK_HEIGHT=$((LATEST_HEIGHT - 1000)) \
&& TRUST_HASH=$(curl -s "$SNAP_RPC/block?height=$BLOCK_HEIGHT" | jq -r .result.block_id.hash); \
echo $LATEST_HEIGHT $BLOCK_HEIGHT $TRUST_HASH
sed -i.bak -E "s|^(enable[[:space:]]+=[[:space:]]+).*$|\1true| ; \
s|^(rpc_servers[[:space:]]+=[[:space:]]+).*$|\1\"$SNAP_RPC,$SNAP_RPC\"| ; \
s|^(trust_height[[:space:]]+=[[:space:]]+).*$|\1$BLOCK_HEIGHT| ; \
s|^(trust_hash[[:space:]]+=[[:space:]]+).*$|\1\"$TRUST_HASH\"|" $HOME/.warden/config/config.toml; \
wardend tendermint unsafe-reset-all --home $HOME/.warden
wget -O $HOME/.warden/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Warden/addrbook.json"
sudo systemctl restart wardend && journalctl -u wardend -f -o cat
Testnet snapshots (updated every 5 hours):
cd $HOME
apt install lz4
sudo systemctl stop wardend
cp $HOME/.warden/data/priv_validator_state.json $HOME/.warden/priv_validator_state.json.backup
rm -rf $HOME/.warden/data
curl -o - -L https://warden-t.snapshot.stavr.tech/warden-snap.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.warden --strip-components 2
mv $HOME/.warden/priv_validator_state.json.backup $HOME/.warden/data/priv_validator_state.json
wget -O $HOME/.warden/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Warden/addrbook.json"
sudo systemctl restart wardend && journalctl -u wardend -f -o cat
apt install lz4
sudo systemctl stop wardend
cp $HOME/.warden/data/priv_validator_state.json $HOME/.warden/priv_validator_state.json.backup
rm -rf $HOME/.warden/data
curl -o - -L https://warden-t.snapshot.stavr.tech/warden-snap.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.warden --strip-components 2
mv $HOME/.warden/priv_validator_state.json.backup $HOME/.warden/data/priv_validator_state.json
wget -O $HOME/.warden/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Warden/addrbook.json"
sudo systemctl restart wardend && journalctl -u wardend -f -o cat
Launch:
sudo systemctl daemon-reload
sudo systemctl enable wardend
sudo systemctl restart wardend && sudo journalctl -u wardend -f -o cat
sudo systemctl enable wardend
sudo systemctl restart wardend && sudo journalctl -u wardend -f -o cat
Creating a validator
Create a new validator using the following command:
Get the public key
wardend tendermint show-validator --home /root/.warden
Go to your home directory
cd $HOME
nano validator.json
nano validator.json
Fill in validator.json as follows:
{
"pubkey": {"#pubkey"},
"amount": "1000000uward",
"moniker": "STAVR_guide",
"identity": "",
"website": "",
"security": "",
"details": "",
"commission-rate": "0.05",
"commission-max-rate": "0.2",
"commission-max-change-rate": "0.2",
"min-self-delegation": "1"
}
"pubkey": {"#pubkey"},
"amount": "1000000uward",
"moniker": "STAVR_guide",
"identity": "",
"website": "",
"security": "",
"details": "",
"commission-rate": "0.05",
"commission-max-rate": "0.2",
"commission-max-change-rate": "0.2",
"min-self-delegation": "1"
}
Then run the command to create the validator:
wardend --home $HOME/.warden tx staking create-validator $HOME/validator.json --from WalletName --chain-id buenavista-1 --fees 500uward -y
Services and tools
Node delete
sudo systemctl stop wardend
sudo systemctl disable wardend
rm /etc/systemd/system/wardend.service
sudo systemctl daemon-reload
cd $HOME
rm -rf wardenprotocol
rm -rf .warden
rm -rf $(which wardend)
sudo systemctl disable wardend
rm /etc/systemd/system/wardend.service
sudo systemctl daemon-reload
cd $HOME
rm -rf wardenprotocol
rm -rf .warden
rm -rf $(which wardend)
Installing snapshot
Use the following commands to restore data from a snapshot:
cd $HOME
apt install lz4
sudo systemctl stop wardend
cp $HOME/.warden/data/priv_validator_state.json $HOME/.warden/priv_validator_state.json.backup
rm -rf $HOME/.warden/data
curl -o - -L https://warden-t.snapshot.stavr.tech/warden-snap.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.warden --strip-components 2
mv $HOME/.warden/priv_validator_state.json.backup $HOME/.warden/data/priv_validator_state.json
wget -O $HOME/.warden/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Warden/addrbook.json"
sudo systemctl restart wardend && journalctl -u wardend -f -o cat
apt install lz4
sudo systemctl stop wardend
cp $HOME/.warden/data/priv_validator_state.json $HOME/.warden/priv_validator_state.json.backup
rm -rf $HOME/.warden/data
curl -o - -L https://warden-t.snapshot.stavr.tech/warden-snap.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.warden --strip-components 2
mv $HOME/.warden/priv_validator_state.json.backup $HOME/.warden/data/priv_validator_state.json
wget -O $HOME/.warden/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Warden/addrbook.json"
sudo systemctl restart wardend && journalctl -u wardend -f -o cat
Useful tools
-
EXPLORER-T:https://explorer.stavr.tech/Warden-Testnet Indexer "ON"
-
RPC-T:https://warden.rpc.t.stavr.tech Snapshot-interval = 100
Seed-T
f6fbded10338c1fed764c656a8968b648922b621@warden-t.seed.stavr.tech:23316
Addrbook-T
wget -O $HOME/.warden/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Warden/addrbook.json"
Genesis-T
wget -O $HOME/.warden/config/genesis.json http://135.181.210.171:29/genesis.json
Auto Setup-T script
wget -O wardent https://raw.githubusercontent.com/111STAVR111/props/main/Warden/wardent && chmod +x wardent && ./wardent
UPDATE 02.09.24
cd $HOME
wget https://github.com/warden-protocol/wardenprotocol/releases/download/v0.4.2/wardend_Linux_x86_64.zip
unzip wardend_Linux_x86_64.zip
rm -rf wardend_Linux_x86_64.zip
chmod +x wardend
mv wardend $(which wardend)
wardend version --long | grep -e commit -e version
#commit: 0bfb022a96b5da6e7cf5c348bdb17d0d4d62195b
#version: 0.4.2
sudo systemctl restart wardend && sudo journalctl -fu wardend -o cat
wget https://github.com/warden-protocol/wardenprotocol/releases/download/v0.4.2/wardend_Linux_x86_64.zip
unzip wardend_Linux_x86_64.zip
rm -rf wardend_Linux_x86_64.zip
chmod +x wardend
mv wardend $(which wardend)
wardend version --long | grep -e commit -e version
#commit: 0bfb022a96b5da6e7cf5c348bdb17d0d4d62195b
#version: 0.4.2
sudo systemctl restart wardend && sudo journalctl -fu wardend -o cat
Useful commands
Info
wardend status 2>&1 | jq .NodeInfo
wardend status 2>&1 | jq .SyncInfo
wardend status 2>&1 | jq .ValidatorInfo
wardend status 2>&1 | jq .SyncInfo
wardend status 2>&1 | jq .ValidatorInfo
Checking node logs
sudo journalctl -fu wardend -o cat
Service status
sudo systemctl status wardend
Service restart
sudo systemctl restart wardend
Service stop
sudo systemctl stop wardend
Service start
sudo systemctl start wardend
reload/disable/enable
sudo systemctl daemon-reload
sudo systemctl disable wardend
sudo systemctl enable wardend
sudo systemctl disable wardend
sudo systemctl enable wardend
Working with keys
New key or key recovery
wardend keys add Wallet_Name
OR
wardend keys add Wallet_Name --recover
OR
wardend keys add Wallet_Name --recover
Checking all keys
wardend keys list
Balance check
wardend query bank balances addressjkl1yjgn7z09ua9vms259j
Delete a key
wardend keys delete Wallet_Name
Key export
wardend keys export wallet
Importing a key
wardend keys import wallet wallet.backup
Validator Management
Editing the validator
wardend tx staking edit-validator \
--new-moniker "Your_Moniker" \
--identity "Keybase_ID" \
--details "Your_Description" \
--website "Your_Website" \
--security-contact "Your_Email" \
--chain-id buenavista-1 \
--commission-rate 0.05 \
--from Wallet_Name \
--gas 350000 -y
--new-moniker "Your_Moniker" \
--identity "Keybase_ID" \
--details "Your_Description" \
--website "Your_Website" \
--security-contact "Your_Email" \
--chain-id buenavista-1 \
--commission-rate 0.05 \
--from Wallet_Name \
--gas 350000 -y
Your Valoper address
wardend keys show Wallet_Name --bech val
Your Val##### Your Valcons-address
wardend tendermint show-address
Information about your validator
wardend query staking validator valoperaddress......
Jail Info
wardend query slashing signing-info $(wardend tendermint show-validator)
Unjail
wardend tx slashing unjail --from Wallet_name --chain-id buenavista-1 --gas 350000 -y
List of active validators
wardend q staking validators -oj --limit=3000 | jq '.validators[] | select(.status=="BOND_STATUS_BONDED")' | jq -r '(.tokens|tonumber/pow(10; 6)|floor|tostring) + " \t " + .description.moniker' | sort -gr | nl
List of inactive validators
wardend q staking validators -oj --limit=3000 | jq '.validators[] | select(.status=="BOND_STATUS_UNBONDED")' | jq -r '(.tokens|tonumber/pow(10; 6)|floor|tostring) + " \t " + .description.moniker' | sort -gr | nl
Checking if the key matches the validator (Win - Good. Lose - Bad)
VALOPER=Enter_Your_valoper_Here
[[ $(wardend q staking validator $VALOPER -oj | jq -r .consensus_pubkey.key) = $(wardend status | jq -r .ValidatorInfo.PubKey.value) ]] && echo -e "\nYou win\n" || echo -e "\nYou lose\n"
[[ $(wardend q staking validator $VALOPER -oj | jq -r .consensus_pubkey.key) = $(wardend status | jq -r .ValidatorInfo.PubKey.value) ]] && echo -e "\nYou win\n" || echo -e "\nYou lose\n"
Withdraw of all awards from all validators
wardend tx distribution withdraw-all-rewards --from Wallet_Name --chain-id buenavista-1 --gas 350000 -y
Output of rewards and commission from your validator
wardend tx distribution withdraw-rewards valoper1amxp0k0hg4edrxg85v07t9ka2tfuhamhldgf8e --from Wallet_Name --gas 350000 --chain-id=buenavista-1 --commission -y
Delegating tokens to your validator
wardend tx staking delegate Your_valoper........ "100000000"uward --from Wallet_Name --gas 350000 --chain-id=buenavista-1 -y
Delegating tokens to another validator
wardend tx staking delegate valoper........ "100000000"uward --from Wallet_Name --gas 350000 --chain-id=buenavista-1 -y
Redistributing tokens to another validator
wardend tx staking redelegate Your_valoper........ valoper........ "100000000"uward --from Wallet_Name --gas 350000 --chain-id=buenavista-1 -y
Unbounding tokens from your validator or another validator
wardend tx staking unbond Your_valoper........ "100000000"uward --from Wallet_Name --gas 350000 --chain-id=buenavista-1 -y
wardend tx staking unbond valoper........ "100000000"uward --from Wallet_Name --gas 350000 --chain-id=buenavista-1 -y
wardend tx staking unbond valoper........ "100000000"uward --from Wallet_Name --gas 350000 --chain-id=buenavista-1 -y
Transfer of tokens from one wallet to another
wardend tx bank send Your_address............ address........... "1000000000000000000"uward --gas 350000 --chain-id=buenavista-1 -y
Voting management
View all proposals
wardend query gov proposals
View a specific proposal
wardend query gov proposal 1
Vote in favor of the motion ("Yes")
wardend tx gov vote 1 yes --from Wallet_Name --gas 350000 --chain-id=buenavista-1 -y
Voting against the motion ("No")
wardend tx gov vote 1 no --from Wallet_Name --gas 350000 --chain-id=buenavista-1 -y
Vote "Abstain"
wardend tx gov vote 1 abstain --from Wallet_Name --gas 350000 --chain-id=buenavista-1 -y
No with Veto vote
wardend tx gov vote 1 no_with_veto --from Wallet_Name --gas 350000 --chain-id=buenavista-1 -y
IBC transfer
Example - Warden -> Osmosis
wardend tx ibc-transfer transfer transfer channel-2 Your_OSMOaddress............ "100000"uward --from Warden_Wallet_Name ---gas 350000 --fees 7000"uward" --chain-id=buenavista-1 -y
Other articles of the section
North Macedonian VPS servers: 15% off with this promo code!
Apply the discount by inserting the promo code in the special field at checkout:
Valid up to and including 21.11.2024, 23:59 (UTC+3)
