Русский
Source Network: Установка и работа с нодой
- Главная
- База знаний
- Инструкции по нодам
- Source Network: Установка и работа с нодой
27.09.2024, 19:41
Описание:
Source Network и Decentralized Data (D2) Foundation, физическое воплощение экосистемы, состоят из веб3-разработчиков, которые стремятся к демократизации данных. Сеть основали, опираясь на идею общественного движения, направленного на возвращение контроля пользователям через обеспечение конфиденциальности, безопасности и согласия.
Минимальные системные требования:
Тип ноды: Testnet
CPU: 4
RAM: 8GB
Хранилище: 150GB
Установка ноды:
1) Автоустановка
wget -O sources https://raw.githubusercontent.com/111STAVR111/props/main/Source/Testnet/sources && chmod +x sources && ./sources
2) Ручная установка
Подготовка сервера
sudo apt update && sudo apt upgrade -y
sudo apt install curl tar wget clang pkg-config libssl-dev jq build-essential bsdmainutils git make ncdu gcc chrony liblz4-tool -y
sudo apt install curl tar wget clang pkg-config libssl-dev jq build-essential bsdmainutils git make ncdu gcc chrony liblz4-tool -y
Установка GO 1.21.6
ver="1.21.6"
wget "https://golang.org/dl/go$ver.linux-amd64.tar.gz"
sudo rm -rf /usr/local/go
sudo tar -C /usr/local -xzf "go$ver.linux-amd64.tar.gz"
rm "go$ver.linux-amd64.tar.gz"
echo "export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin" >> $HOME/.bash_profile
source $HOME/.bash_profile
go version
wget "https://golang.org/dl/go$ver.linux-amd64.tar.gz"
sudo rm -rf /usr/local/go
sudo tar -C /usr/local -xzf "go$ver.linux-amd64.tar.gz"
rm "go$ver.linux-amd64.tar.gz"
echo "export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin" >> $HOME/.bash_profile
source $HOME/.bash_profile
go version
Версия 01.08.24
cd $HOME && mkdir $HOME/go/bin/
git clone https://github.com/Source-Protocol-Cosmos/source.git
cd ~/source
git checkout v.3.0.2
make install
git clone https://github.com/Source-Protocol-Cosmos/source.git
cd ~/source
git checkout v.3.0.2
make install
Установка
sourced init STAVR_guide --chain-id=source-1
sourced config chain-id source-1
sourced config chain-id source-1
Создание/восстановление кошелька
sourced keys add <walletname>
OR
sourced keys add <walletname> --recover
OR
sourced keys add <walletname> --recover
Установка Genesis
curl -s https://raw.githubusercontent.com/Source-Protocol-Cosmos/testnets/master/sourcetest-1/genesis.json > ~/.source/config/genesis.json
Настройка минимальной цены газа и Peers/Seeds
sed -i.bak -e "s/^minimum-gas-prices *=.*/minimum-gas-prices = \"0.25usource\"/;" ~/.source/config/app.toml
external_address=$(wget -qO- eth0.me)
sed -i.bak -e "s/^external_address *=.*/external_address = \"$external_address:26656\"/" $HOME/.source/config/config.toml
peers=""
sed -i.bak -e "s/^persistent_peers *=.*/persistent_peers = \"$peers\"/" $HOME/.source/config/config.toml
seeds=""
sed -i.bak -e "s/^seeds =.*/seeds = \"$seeds\"/" $HOME/.source/config/config.toml
sed -i 's/max_num_inbound_peers =.*/max_num_inbound_peers = 50/g' $HOME/.source/config/config.toml
sed -i 's/max_num_outbound_peers =.*/max_num_outbound_peers = 50/g' $HOME/.source/config/config.toml
external_address=$(wget -qO- eth0.me)
sed -i.bak -e "s/^external_address *=.*/external_address = \"$external_address:26656\"/" $HOME/.source/config/config.toml
peers=""
sed -i.bak -e "s/^persistent_peers *=.*/persistent_peers = \"$peers\"/" $HOME/.source/config/config.toml
seeds=""
sed -i.bak -e "s/^seeds =.*/seeds = \"$seeds\"/" $HOME/.source/config/config.toml
sed -i 's/max_num_inbound_peers =.*/max_num_inbound_peers = 50/g' $HOME/.source/config/config.toml
sed -i 's/max_num_outbound_peers =.*/max_num_outbound_peers = 50/g' $HOME/.source/config/config.toml
Pruning (опционально)
pruning="custom"
pruning_keep_recent="1000"
pruning_keep_every="0"
pruning_interval="100"
sed -i -e "s/^pruning *=.*/pruning = \"$pruning\"/" $HOME/.source/config/app.toml
sed -i -e "s/^pruning-keep-recent *=.*/pruning-keep-recent = \"$pruning_keep_recent\"/" $HOME/.source/config/app.toml
sed -i -e "s/^pruning-keep-every *=.*/pruning-keep-every = \"$pruning_keep_every\"/" $HOME/.source/config/app.toml
sed -i -e "s/^pruning-interval *=.*/pruning-interval = \"$pruning_interval\"/" $HOME/.source/config/app.toml
pruning_keep_recent="1000"
pruning_keep_every="0"
pruning_interval="100"
sed -i -e "s/^pruning *=.*/pruning = \"$pruning\"/" $HOME/.source/config/app.toml
sed -i -e "s/^pruning-keep-recent *=.*/pruning-keep-recent = \"$pruning_keep_recent\"/" $HOME/.source/config/app.toml
sed -i -e "s/^pruning-keep-every *=.*/pruning-keep-every = \"$pruning_keep_every\"/" $HOME/.source/config/app.toml
sed -i -e "s/^pruning-interval *=.*/pruning-interval = \"$pruning_interval\"/" $HOME/.source/config/app.toml
Indexer (опционально)
indexer="null" &&
sed -i -e "s/^indexer *=.*/indexer = \"$indexer\"/" $HOME/.source/config/config.toml
sed -i -e "s/^indexer *=.*/indexer = \"$indexer\"/" $HOME/.source/config/config.toml
Установка addrbook
wget -O $HOME/.source/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Source/Testnet/addrbook.json"
Создание сервисного файла
sudo tee /etc/systemd/system/sourced.service > /dev/null <<EOF
[Unit]
Description=source test
After=network-online.target
[Service]
User=$USER
ExecStart=$(which sourced) start
Restart=on-failure
RestartSec=3
LimitNOFILE=65535
[Install]
WantedBy=multi-user.target
EOF
SnapShot Testnet updated every 5 hours
cd $HOME
sudo systemctl stop sourced
cp $HOME/.source/data/priv_validator_state.json $HOME/.source/priv_validator_state.json.backup
rm -rf $HOME/.source/data
curl -o - -L https://source-t.snapshot.stavr.tech/source-snap.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.source --strip-components 2
curl -o - -L https://source-t.wasm.stavr.tech/wasm-snap.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.source/data --strip-components 3
mv $HOME/.source/priv_validator_state.json.backup $HOME/.source/data/priv_validator_state.json
wget -O $HOME/.source/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Source/addrbook.json"
sudo systemctl restart sourced && journalctl -u sourced -f -o cat
sudo systemctl stop sourced
cp $HOME/.source/data/priv_validator_state.json $HOME/.source/priv_validator_state.json.backup
rm -rf $HOME/.source/data
curl -o - -L https://source-t.snapshot.stavr.tech/source-snap.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.source --strip-components 2
curl -o - -L https://source-t.wasm.stavr.tech/wasm-snap.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.source/data --strip-components 3
mv $HOME/.source/priv_validator_state.json.backup $HOME/.source/data/priv_validator_state.json
wget -O $HOME/.source/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Source/addrbook.json"
sudo systemctl restart sourced && journalctl -u sourced -f -o cat
Запуск
sudo systemctl daemon-reload
sudo systemctl enable sourced
sudo systemctl restart sourced && sudo journalctl -fu sourced -o cat
sudo systemctl enable sourced
sudo systemctl restart sourced && sudo journalctl -fu sourced -o cat
Создание валидатора
sourced tx staking create-validator \
--amount=1000000usource \
--pubkey=$(sourced tendermint show-validator) \
--moniker=STAVR_guide \
--chain-id=sourcetest-1 \
--commission-rate="0.10" \
--commission-max-rate="0.20" \
--commission-max-change-rate="0.1" \
--min-self-delegation="1" \
--fees=100usource \
--from=<walletName> \
--identity="" \
--website="" \
--fees 5000usource \
--details="" -y
--amount=1000000usource \
--pubkey=$(sourced tendermint show-validator) \
--moniker=STAVR_guide \
--chain-id=sourcetest-1 \
--commission-rate="0.10" \
--commission-max-rate="0.20" \
--commission-max-change-rate="0.1" \
--min-self-delegation="1" \
--fees=100usource \
--from=<walletName> \
--identity="" \
--website="" \
--fees 5000usource \
--details="" -y
Удаление ноды
sudo systemctl stop sourced
sudo systemctl disable sourced
rm /etc/systemd/system/sourced.service
sudo systemctl daemon-reload
cd $HOME
rm -rf .source
rm -rf source
rm -rf $(which sourced)
sudo systemctl disable sourced
rm /etc/systemd/system/sourced.service
sudo systemctl daemon-reload
cd $HOME
rm -rf .source
rm -rf source
rm -rf $(which sourced)
Полезные команды
Информация
sourced status 2>&1 | jq .NodeInfo
sourced status 2>&1 | jq .SyncInfo
sourced status 2>&1 | jq .ValidatorInfo
sourced status 2>&1 | jq .SyncInfo
sourced status 2>&1 | jq .ValidatorInfo
Проверка логов ноды
sudo journalctl -fu sourced -o cat
Проверка статуса сервиса
sudo systemctl status sourced
Перезапуск сервиса
sudo systemctl restart sourced
Остановка сервиса
sudo systemctl stop sourced
Запуск сервиса
sudo systemctl start sourced
Перезапуск/отключение/включение
sudo systemctl daemon-reload
sudo systemctl disable sourced
sudo systemctl enable sourced
sudo systemctl disable sourced
sudo systemctl enable sourced
Ваш Peer
echo $(sourced tendermint show-node-id)'@'$(wget -qO- eth0.me)':'$(cat $HOME/.source/config/config.toml | sed -n '/Address to listen for incoming connection/{n;p;}' | sed 's/.*://; s/".*//')
Работа с ключами
Новый ключ или Восстановление ключа
sourced keys add Wallet_Name
OR
sourced keys add Wallet_Name --recover
OR
sourced keys add Wallet_Name --recover
Проверка всех ключей
sourced keys list
Проверка баланса
sourced query bank balances address....jkl1yjgn7z09ua9vms259j
Удаление ключа
sourced keys delete Wallet_Name
Экспорт ключа
sourced keys export wallet
Импорт ключа
sourced keys import wallet wallet.backup
Работа с Валидатором
Редактирование Валидатора
sourced tx staking edit-validator \
--new-moniker "Your_Moniker" \
--identity "Keybase_ID" \
--details "Your_Description" \
--website "Your_Website" \
--security-contact "Your_Email" \
--chain-id source-1 \
--commission-rate 0.05 \
--from Wallet_Name \
--gas 350000 \
--fees "7000"usource -y
--new-moniker "Your_Moniker" \
--identity "Keybase_ID" \
--details "Your_Description" \
--website "Your_Website" \
--security-contact "Your_Email" \
--chain-id source-1 \
--commission-rate 0.05 \
--from Wallet_Name \
--gas 350000 \
--fees "7000"usource -y
Ваш Valope-адрес
sourced keys show Wallet_Name --bech val
Ваш Valcon-адрес
sourced tendermint show-address
Информация о вашем валидаторе
sourced query staking validator valoperaddress......
Информация о Jail
sourced query slashing signing-info $(sourced tendermint show-validator)
Unjail
sourced tx slashing unjail --from Wallet_name --chain-id source-1 --gas 350000 --fees "7000"usource -y
Список активных валидаторов
sourced q staking validators -oj --limit=3000 | jq '.validators[] | select(.status=="BOND_STATUS_BONDED")' | jq -r '(.tokens|tonumber/pow(10; 6)|floor|tostring) + " \t " + .description.moniker' | sort -gr | nl
Список неактивных валидаторов
sourced q staking validators -oj --limit=3000 | jq '.validators[] | select(.status=="BOND_STATUS_UNBONDED")' | jq -r '(.tokens|tonumber/pow(10; 6)|floor|tostring) + " \t " + .description.moniker' | sort -gr | nl
Проверка ключей на соответствие с валидатором (Win - хорошо. Lose - плохо)
VALOPER=Enter_Your_valoper_Here
[[ $(sourced q staking validator $VALOPER -oj | jq -r .consensus_pubkey.key) = $(sourced status | jq -r .ValidatorInfo.PubKey.value) ]] && echo -e "\nYou win\n" || echo -e "\nYou lose\n"
[[ $(sourced q staking validator $VALOPER -oj | jq -r .consensus_pubkey.key) = $(sourced status | jq -r .ValidatorInfo.PubKey.value) ]] && echo -e "\nYou win\n" || echo -e "\nYou lose\n"
Вывести все награды со всех валидаторов
sourced tx distribution withdraw-all-rewards --from Wallet_Name --chain-id source-1 --gas 350000 --fees "7000"usource -y
Вывод средств и комиссия с вашего Валидатора
sourced tx distribution withdraw-rewards valoper1amxp0k0hg4edrxg85v07t9ka2tfuhamhldgf8e --from Wallet_Name --gas 350000 --fees "7000"usource --chain-id=source-1 --commission -y
Делегируйте токены вашему валидатору
sourced tx staking delegate Your_valpoer........ "100000000"usource --from Wallet_Name --gas 350000 --fees "7000"usource --chain-id=source-1 -y
Делегируйте токены другому валидатору
sourced tx staking delegate valpoer........ "100000000"usource --from Wallet_Name --gas 350000 --fees "7000"usource --chain-id=source-1 -y
Переводите токены из кошелька в кошелек
sourced tx bank send Your_address............ address........... "1000000000000000000"usource --gas 350000 --fees "7000"usource --chain-id=source-1 -y
Управление
Посмотреть все предложения
sourced query gov proposals
Посмотреть конкретное предложение
sourced query gov proposal 1
Голосовать "за"
sourced tx gov vote 1 yes --from Wallet_Name --gas 350000 --fees "7000"usource --chain-id=source-1 -y
Голосовать "против"
sourced tx gov vote 1 no --from Wallet_Name --gas 350000 --fees "7000"usource --chain-id=source-1 -y
Воздержаться
sourced tx gov vote 1 abstain --from Wallet_Name --gas 350000 --fees "7000"usource --chain-id=source-1 -y
Голосовать "против" с veto
sourced tx gov vote 1 no_with_veto --from Wallet_Name --gas 350000 --fees "7000"usource --chain-id=source-1 -y
IBC transfer
sourced tx ibc-transfer transfer transfer channel-2 Your_OSMOaddress............ "100000"usource --from Your_Source_Wallet_Name ---gas 350000 --fees "70000"usource --chain-id=source-1 -y
Другие статьи раздела
